My Spings have been installed
mitch @ 10:23 am on June 5, 2004
Thursday night, my friend (dave) and I installed my Eibach Pro Kit Lowering Springs (1.3 inch drop). We were working untill just about midnight on them (started after work). I had read that people usually only took 1.5 hours to install them… I’m not sure, but they must be on something… I’m not sure how anyone could have installed them all that quickly…. Granted, I think knowing what we do now about installing them, I think we could have done it MUCH faster than the ~6 hours it took us…. and we’ll get a chance soon too, the process of lowering my car blows the stock shocks that are in it still. We’ll get to do it all again. The rear from start to finish only took us 1.5 hours which wasn’t bad. They were so easy. The first front one we did however… I got a pin stuck that I was using to bang out a bolt that held in the fork for the strut… and that took us a good half hour atleast to remove. Man… lessons learned. The second front spring took us probably about an hour and a half to swap out… which was about half the time the first one took…
